Guest Room Control System Functions and Features:
1. Energy-saving function
1). Card power switch: Energy saving can be effectively achieved through the card power-on and card power-off functions.
2). Thermostat: Remotely control the on/off and operating status of the air conditioner through the guest control system and the front desk workstation network. Achieve different operating statuses based on season, time period, and whether the room has different operating conditions to achieve energy saving.
2. Guest Room Control System Lighting control function
Sleep switch: To avoid guests turning off lights one by one during sleep, the controller is equipped with a "sleep" switch. When the guest falls asleep, simply press the "sleep" button (equivalent to the main control switch) to turn off the lights in the room and control them. The device will enter the night service program (without turning off the bathroom lights). When the main switch is pressed again, the corridor lights and luggage rack lights will automatically turn on, or the corresponding lights can be turned on by pressing the corresponding switches.
3. Guest control system service function
"Cleaning," "Do Not Disturb," and "Doorbell" system: "Do Not Disturb" interlocks with "Cleaning" and "Doorbell." When the guest presses the "Do Not Disturb" button, "Cleaning" and "Doorbell" will be inoperable; when the guest requests "Cleaning," the "Cleaning" indicator light on the sign will light up, and the request will also be displayed on the main station and the computer on the corresponding floor. The system will automatically time this. Cleaning personnel can be notified promptly through the internal network system.
When a visitor sends a "Do Not Disturb" request, the "Do Not Disturb" indicator light on the sign will light up, and the request will also be displayed on the main station and the computer on the corresponding floor. At this time, the doorbell is turned off; the smart hotel guest room control system will upload real-time request information to the main station and the computer display screens on the relevant floors.
4. Guest Room Control System Emergency call system: The emergency call switch is set on the bathroom bathtub, connected to the hotel guest room control system, and connected to the front desk and various workstations to achieve linkage alarm. When there is a guest room emergency call alarm, the housekeeping department needs to verify it on site in the first time. After the confirmation process, the alarm cancellation operation can be performed on the software.